User manual

Total Access 600 Series T1 ATM IAD UIG/64200681L2-31B
Page 45
© 2002, ADTRAN, Inc. Total Access 600 Series User Manual
>IP Routes
This shows the current routes in the 600 and their use.
>LAN Stats
This shows traffic over the LAN interface.
>IP Stats
This shows IP traffic through the 600.
Configuring the Router – Logs
The Logs menu (Figure 14) contains logs displaying important information about the running condition of the Total
Access 600. The logs can be set to capture diagnostics of error conditions only by way of a log level. The levels are
divided up as follows:
level 0 - Fatal event (causes reset)
level 1 - Critical event
level 2 - Error event
level 3 - Warning event
level 4 - Notify event
level 5 - Informational event
level 6 - Debugging event
Figure 14. Router/Logs Menu
Sys log Host
Set this to the IP address or domain name (if DNS configured) of the sys log host device. All log events are sent to this
device.
PPP Log
Information pertaining to the PPP negotiation and authentication is logged in the PPP log.