User manual

Total Access 600 Series T1 ATM IAD UIG/64200681L2-31B

Page 44

LAN-TO-WAN (Out)

The packets which come out toward the WAN from the TA600 can be filtered in three ways:

Out Exceptions

This is a list of up to 32 filter entries. The setup is exactly the same as the )

,/7(56

,

(

;&(37,216

list.

Configuring the Router – Status

Use the 5

287(5

6

7$786

menu to view and set the parameters shown in Figure 13. The 5

287(5

6

7$786

screens give the user useful information for debugging the current routes in the 600.

Figure 13. Router/Status Menu

>Session

This menu maintains statistics about the active ATM PVCs.

>ARP cache

This is a listing of the currently connected Ethernet port on the LAN.

>Bridge Table

This shows the detected MAC addresses and the interface to which they are associated.

$1'

logically AND this filter with the next filter in the

list.

logically OR this filter with the next filter in the list.

DISABLED (

GHI Turns off packet input filtering. No outgoing packets

are blocked.

LOCK

All outgoing packets to the WAN are blocked except as

defined in the

FILTERS/OUT EXCEPTIONS

list.

ORWARD

All outgoing packets to the WAN are not blocked ex-

cept as defined in the

FILTERS/OUT EXCEPTIONS

list.