Modem Installation And Maintenance Practice
Table Of Contents
- Total Access 1240 Installation and Maintenance Practice
- Front Matter
- Section 1, Introduction
- Section 2, Application Guidelines
- Section 3, Installation
- Section 4, Provisioning Defaults
- Section 5, User Interface
- Introduction
- System Management
- Logging on to the Total Access 1240
- Menu Structure
- Menu Navigation
- Menu Trees
- Menu Descriptions
- Configuration Screen
- Bridge Circuit Management Menu
- System Management Menu
- SHDSL Ports Menu
- System Alarm Log Screen
- Contact Information Screen
- Section 6, Maintenance
- Section 7, Specifications
- Appendix A, Declaration of Conformity
- Appendix B, SCA File Format
- Appendix C, Warranty
Section 5, User Interface - Menu Descriptions
61179605L5-5B 5-59
Code Download Method Menu
The Code Download Method menu (see Figure 5-41) displays two methods to download code:
•Y-Modem
•TFTP
CAUTION
Downloading new code is service affecting.
NOTE
The System Management menu TFTP IP address option must be
configured to use TFTP.
Figure 5-41. Code Download Method Menu
The Code Download Method menu options are shown in Table 5-43.
Table 5-43. Code Download Method Menu Options
Option Description Function
1 Y-Modem This option displays the “Y-Modem Download Menu” on
page 5-60.
2 TFTP This option displays the “TFTP Firmware Download
Screen” on page 5-61.
Total Access 1240 - IPoE Fed 09/01/05 03:55
Unacknowledged Alarms: None
Code Download Method
1. Y-Modem (Craft Port)
2. TFTP
Selection :
'?' - System Help Screen