Modem Installation And Maintenance Practice
Table Of Contents
- Total Access 1240 Installation and Maintenance Practice
- Front Matter
- Section 1, Introduction
- Section 2, Application Guidelines
- Section 3, Installation
- Section 4, Provisioning Defaults
- Section 5, User Interface
- Introduction
- System Management
- Logging on to the Total Access 1240
- Menu Structure
- Menu Navigation
- Menu Trees
- Menu Descriptions
- Configuration Screen
- Bridge Circuit Management Menu
- System Management Menu
- SHDSL Ports Menu
- System Alarm Log Screen
- Contact Information Screen
- Section 6, Maintenance
- Section 7, Specifications
- Appendix A, Declaration of Conformity
- Appendix B, SCA File Format
- Appendix C, Warranty
Total Access 1240 Installation and Maintenance Practice
5-58 61179605L5-5B
External Alarm Severity Menu
The External Alarm Severity menu (see Figure 5-40) is used to set customized alarm profiles
for each of the five external alarms.
Figure 5-40. External Alarm Severity Menu
The External Alarm Severity menu options are shown in Table 5-42.
NOTE
The alarm severity levels are user-defined based on the impact to
customer service.
Table 5-42. External Alarm Severity Menu Options
Option Description Function
1 Critical This option is used to designate a critical alarm.
2 Major This option is used to designate a major alarm.
3 Minor This option is used to designate a minor alarm.
4 Load Shedding This option is used to designate an alarm that shuts
down SHDSL services.
Total Access 1240 - IPoE Fed 09/01/05 03:55
Unacknowledged Alarms: None
External Alarm Severity
1. Critical
2. Major
3. Minor
4. Load Shedding
Selection :
'?' - System Help Screen