Modem Installation And Maintenance Practice
Table Of Contents
- Total Access 1240 Installation and Maintenance Practice
- Front Matter
- Section 1, Introduction
- Section 2, Application Guidelines
- Section 3, Installation
- Section 4, Provisioning Defaults
- Section 5, User Interface
- Introduction
- System Management
- Logging on to the Total Access 1240
- Menu Structure
- Menu Navigation
- Menu Trees
- Menu Descriptions
- Configuration Screen
- Bridge Circuit Management Menu
- System Management Menu
- SHDSL Ports Menu
- System Alarm Log Screen
- Contact Information Screen
- Section 6, Maintenance
- Section 7, Specifications
- Appendix A, Declaration of Conformity
- Appendix B, SCA File Format
- Appendix C, Warranty
Total Access 1240 Installation and Maintenance Practice
5-56 61179605L5-5B
NOTE
The SNMP version should match the agent used for SNMP on the
network management side.
4 Version This option is used to configure the SNMP version for the
second SNMP trap host.
Options include the following:
•SNMPv1
•SNMPv2
5 IP Address This option is used to configure the third SNMP trap
host IP address in decimal dot format (i.e.,
###.###.###.###).
6 Version This option is used to configure the SNMP version for the
third SNMP trap host.
Options include the following:
•SNMPv1
•SNMPv2
7 Trap Port This option is used to configure the SNMP trap port.
The trap port is defaulted to port 162 and is
provisionable for cases in which port 162 is blocked.
Table 5-40. SNMP Trap Hosts Menu Options (Continued)
Option Description Function