Modem Installation And Maintenance Practice

Section 5, User Interface - Menu Descriptions
61179605L5-5B 5-53
SNMP Community Names Menu
The SNMP Community Names menu (see Figure 5-37) is used to establish up to three named
accounts which specify unique IP addresses and privileges for network management. To
restrict SNMP remote access to a single IP address, assign the IP address to a community. An
IP address of 0.0.0.0 provides access from all IP addresses.
Figure 5-37. SNMP Community Names Menu
The SNMP Community Names menu options are shown in Table 5-39.
Table 5-39. SNMP Community Names Menu Options
Option Description Function
1 Name This option is used to configure the first SNMP
community. Settings include Private and Public.
2 IP Address This option is used to configure the first SNMP
community IP address in decimal dot format (i.e.,
###.###.###.###).
3 Privileges This option is used to configure the first SNMP
community privilege level. Options include Read/Write
and Read.
4 Name This option is used to configure the second SNMP
community. Settings include Private and Public.
5 IP Address This option is used to configure the second SNMP
community IP address in decimal dot format (i.e.,
###.###.###.###).
Total Access 1240 - IPoE Fed
Unacknowledged Alarms: None
SNMP Community Names
Set Name to 0 to delete Community
1. Name private
2. IP Address 0.0.0.0
3. Privileges Read
4. Name public
5. IP Address 0.0.0.0
6. Privileges Read/Write
7. Name Not Configured
8. IP Address 0.0.0.0
9. Privileges
Selection :
'?' - System Help Screen