Modem Installation And Maintenance Practice
Table Of Contents
- Total Access 1240 Installation and Maintenance Practice
- Front Matter
- Section 1, Introduction
- Section 2, Application Guidelines
- Section 3, Installation
- Section 4, Provisioning Defaults
- Section 5, User Interface
- Introduction
- System Management
- Logging on to the Total Access 1240
- Menu Structure
- Menu Navigation
- Menu Trees
- Menu Descriptions
- Configuration Screen
- Bridge Circuit Management Menu
- System Management Menu
- SHDSL Ports Menu
- System Alarm Log Screen
- Contact Information Screen
- Section 6, Maintenance
- Section 7, Specifications
- Appendix A, Declaration of Conformity
- Appendix B, SCA File Format
- Appendix C, Warranty
Total Access 1240 Installation and Maintenance Practice
5-48 61179605L5-5B
Current Baud Rate Menu
The Current Baud Rate menu (see Figure 5-33) displays the current baud rate. The default
management port baud rate is 9600 bps.
Figure 5-33. Current Baud Rate Menu
The Current Baud Rate menu options are shown in Table 5-35.
CAUTION
If the baud rate is changed, the rate changes immediately, and the
terminal emulation software must be updated to reflect the change.
Table 5-35. Current Baud Rate Menu Options
Option Description Function
1 9600 This option configures the baud rate to 9600 bps.
2 19200 This option configures the baud rate to 19200 bps.
3 38400 This option configures the baud rate to 38400 bps.
Total Access 1240 - IPoE Fed 09/01/05 03:54
Unacknowledged Alarms: None
Current Baud Rate: 9600
Baud Rate change is instantaneous, remember to adjust your terminal
1. 9600
2. 19200
3. 38400
Selection :
'?' - System Help Screen