Modem Installation And Maintenance Practice
Table Of Contents
- Total Access 1240 Installation and Maintenance Practice
- Front Matter
- Section 1, Introduction
- Section 2, Application Guidelines
- Section 3, Installation
- Section 4, Provisioning Defaults
- Section 5, User Interface
- Introduction
- System Management
- Logging on to the Total Access 1240
- Menu Structure
- Menu Navigation
- Menu Trees
- Menu Descriptions
- Configuration Screen
- Bridge Circuit Management Menu
- System Management Menu
- SHDSL Ports Menu
- System Alarm Log Screen
- Contact Information Screen
- Section 6, Maintenance
- Section 7, Specifications
- Appendix A, Declaration of Conformity
- Appendix B, SCA File Format
- Appendix C, Warranty
Total Access 1240 Installation and Maintenance Practice
5-46 61179605L5-5B
Time/Date Adjust Menu
The Time/Date Adjust menu (see Figure 5-32) is used to set the system time and date and
configure Simple Network Management Protocol (SNTP) client settings. The time and date
appears on most screens and is also used for performance monitoring displays.
Figure 5-32. Time/Date Adjust Menu
The Time/Date Adjust Menu options are shown in Table 5-34.
Table 5-34. Time/Date Adjust Menu Options
Option Description Function
1 Adjust Time This option is used to set the time in a 24-hour format.
2 Adjust Date This option is used to set the date in MM/DD/YY format.
3 SNTP: Status This option is used to enable or disable the SNTP
capabilities.
Simple Network Time Protocol (SNTP) is a connection
less User Datagram Protocol (UDP) used to synchronize
the time with a high-accuracy network time server.
4 SNTP: Server Addr. This option is used to set the SNTP server address.
The SNTP server address must be entered in decimal
form in the box provided separated by periods.
5 SNTP: Poll Int. This option is used to set the SNTP poll interval.
The SNTP poll interval is the number of seconds that the
adapter waits between sending SNTP requests and
messages to the SNTP server.
Total Access 1240 - IPoE Fed
Unacknowledged Alarms: None
Time/Date Adjust
1. Adjust Time 3:54
2. Adjust Date 09/01/05
3. SNTP: Status ENABLED
4. SNTP: Server Addr. 192.168.1.100
5. SNTP: Poll Int. 0
6. SNTP: Timezone 0
Selection :
'?' - System Help Screen