Modem Installation And Maintenance Practice
Table Of Contents
- Total Access 1240 Installation and Maintenance Practice
- Front Matter
- Section 1, Introduction
- Section 2, Application Guidelines
- Section 3, Installation
- Section 4, Provisioning Defaults
- Section 5, User Interface
- Introduction
- System Management
- Logging on to the Total Access 1240
- Menu Structure
- Menu Navigation
- Menu Trees
- Menu Descriptions
- Configuration Screen
- Bridge Circuit Management Menu
- System Management Menu
- SHDSL Ports Menu
- System Alarm Log Screen
- Contact Information Screen
- Section 6, Maintenance
- Section 7, Specifications
- Appendix A, Declaration of Conformity
- Appendix B, SCA File Format
- Appendix C, Warranty
Total Access 1240 Installation and Maintenance Practice
5-42 61179605L5-5B
Restore IP Factory Defaults Menu
The Restore IP Factory Defaults menu (see Figure 5-28) is used to reset all of the IP factory
defaults.
CAUTION
This is service affecting. If IP factory defaults are enabled remotely,
IP connectivity is lost.
Figure 5-28. Restore IP Factory Defaults Menu
Total Access 1240 - IPoE Fed 09/01/05 03:52
Unacknowledged Alarms: None
Restore IP Factory Defaults
1. Yes - Service Affecting
Selection :
'?' - System Help Screen