Modem Installation And Maintenance Practice
Table Of Contents
- Total Access 1240 Installation and Maintenance Practice
- Front Matter
- Section 1, Introduction
- Section 2, Application Guidelines
- Section 3, Installation
- Section 4, Provisioning Defaults
- Section 5, User Interface
- Introduction
- System Management
- Logging on to the Total Access 1240
- Menu Structure
- Menu Navigation
- Menu Trees
- Menu Descriptions
- Configuration Screen
- Bridge Circuit Management Menu
- System Management Menu
- SHDSL Ports Menu
- System Alarm Log Screen
- Contact Information Screen
- Section 6, Maintenance
- Section 7, Specifications
- Appendix A, Declaration of Conformity
- Appendix B, SCA File Format
- Appendix C, Warranty
Total Access 1240 Installation and Maintenance Practice
5-24 61179605L5-5B
Duplex Mode Menu
The Duplex Mode menu (see Figure 5-17) is used to select the duplex mode of the Ethernet
interface.
Figure 5-17. Duplex Mode Menu
NOTE
The duplex mode displayed in the title indicates the current duplex
mode being viewed or provisioned.
The Duplex Mode menu options are shown in Table 5-14.
Table 5-14. Duplex Mode Menu Options
Option Description Function
1 Auto Negotiate This option sets the system to automatically detect the
duplex mode of the attached device.
2 Full Duplex This option sets the Ethernet interface to transmit and
receive simultaneously.
3 Half Duplex This option sets the Ethernet interface to transmit or
receive at a given time, but not simultaneously.
Total Access 1240 - IPoE Fed 09/01/05 03:44
Unacknowledged Alarms: None
Duplex Mode - Full Duplex
1. Auto Negotiate
2. Full Duplex
3. Half Duplex
Selection :
'?' - System Help Screen