Modem Installation And Maintenance Practice
Table Of Contents
- Total Access 1240 Installation and Maintenance Practice
- Front Matter
- Section 1, Introduction
- Section 2, Application Guidelines
- Section 3, Installation
- Section 4, Provisioning Defaults
- Section 5, User Interface
- Introduction
- System Management
- Logging on to the Total Access 1240
- Menu Structure
- Menu Navigation
- Menu Trees
- Menu Descriptions
- Configuration Screen
- Bridge Circuit Management Menu
- System Management Menu
- SHDSL Ports Menu
- System Alarm Log Screen
- Contact Information Screen
- Section 6, Maintenance
- Section 7, Specifications
- Appendix A, Declaration of Conformity
- Appendix B, SCA File Format
- Appendix C, Warranty
Section 5, User Interface - Menu Navigation
61179605L5-5B 5-5
MENU NAVIGATION
Basic menu navigation is accomplished by selecting the desired option number and then
pressing
ENTER. To return to the previous menu or screen, press the ESC (escape) key. To
access the System Help screen, press the question mark (
?) key, and press ENTER.
Hot Keys
Table 5-1 shows the general keyboard commands and Table 5-2 shows the menu specific hot
keys for the Total Access 1240 system.
Table 5-1. General Keyboard Commands
Keyboard Command Description
BACKSPACE
This keyboard command is used to delete the character to the left of the
cursor during keyboard input.
ENTER (or Return) This keyboard command is used to terminate input.
CTRL+R (Control and r) This keyboard command is used to renew the display.
CTRL+X (Control and x) This keyboard command is used to force the terminal menu display to the
top level.
ESC This keyboard command is used to return to the previous menu.
Spacebar This keyboard command is used to toggle the setting choices for a text
field.
Table 5-2. Menu Specific Hot Keys
Hot Key Description
Ethernet Statistics
C
This hot key is used to clear the current Ethernet statistics.
J
This hot key is used to jump to the Current or Previous Ethernet statistics screen.
Bridge Statistics
C
This hot key is used to clear the current Bridge statistics.
J
This hot key is used to jump to the Current or Previous Bridge statistics menu.
M
This hot key is used to display the next bridge.
N
This hot key is used to display the next port.
P
This hot key is used to go to the previous port.
SHDSL Provisioning
N This hot key is used to display the next loop.
P This hot key is used to display the previous loop.
S This hot key is used to select a specific loop.