Modem Installation And Maintenance Practice
Table Of Contents
- Total Access 1240 Installation and Maintenance Practice
- Front Matter
- Section 1, Introduction
- Section 2, Application Guidelines
- Section 3, Installation
- Section 4, Provisioning Defaults
- Section 5, User Interface
- Introduction
- System Management
- Logging on to the Total Access 1240
- Menu Structure
- Menu Navigation
- Menu Trees
- Menu Descriptions
- Configuration Screen
- Bridge Circuit Management Menu
- System Management Menu
- SHDSL Ports Menu
- System Alarm Log Screen
- Contact Information Screen
- Section 6, Maintenance
- Section 7, Specifications
- Appendix A, Declaration of Conformity
- Appendix B, SCA File Format
- Appendix C, Warranty
Section 4, Provisioning Defaults - Introduction
61179605L5-5B 4-3
(Static) Default Gateway 0–255.0–255.0–255.1–254 192.168.1.254
TFTP IP Address 0–255.0–255.0–255.0–255 192.168.1.2
IP VLAN ID 1 (untagged)
2 to 4094 (tagged)
1 (untagged)
Test IP Address
IP Address 0–255.0–255.0–255.0–255 Not configured
Ping Timeout 1–10 seconds 1 second
Number of Pings 1–8 pings 4 pings
Time/Date
Time HH.MM (24 hour format) N/A
Date MM.DD.YY N/A
SNTP Network Time Enabled
Disabled
Disabled
SNTP Server Address 0–255.0–255.0–255.0–255 Not configured
SNTP Poll Interval 5 to 60 minutes, in 5-minute
increments
60 minutes
SNTP Time Zone GMT-12 to GMT+13 GMT
Baud Rate
Baud Rate 9600 bps
19200 bps
38400 bps
9600 bps
Table 4-4. User Port Default Provisioning Options
Provisioning Option Available Options Default Setting
Card Provisioning
Service State In Service
Out of Service-Unassigned
Out of Service-Maintenance
Out of Service-Maintenance
SHDSL Loop Provisioning
Service State In Service
Out of Service-Unassigned
Out of Service-Maintenance
Out of Service-Maintenance
Interface Mode 2-wire
4-wire
2-wire
Rate N × 64 kbps, where Ν=3 to 36 2048 kbps (N=32)
Table 4-3. SNMP Management Default Provisioning Options (Continued)
Provisioning Option Available Options Default Setting