Modem Installation And Maintenance Practice
Table Of Contents
- Total Access 1240 Installation and Maintenance Practice
- Front Matter
- Section 1, Introduction
- Section 2, Application Guidelines
- Section 3, Installation
- Section 4, Provisioning Defaults
- Section 5, User Interface
- Introduction
- System Management
- Logging on to the Total Access 1240
- Menu Structure
- Menu Navigation
- Menu Trees
- Menu Descriptions
- Configuration Screen
- Bridge Circuit Management Menu
- System Management Menu
- SHDSL Ports Menu
- System Alarm Log Screen
- Contact Information Screen
- Section 6, Maintenance
- Section 7, Specifications
- Appendix A, Declaration of Conformity
- Appendix B, SCA File Format
- Appendix C, Warranty
Section 3, Installation - Ground and Power Connections
61179605L5-5B 3-9
Ethernet Connection
The Total Access 1240 interfaces with networks through an Ethernet port. Figure 3-7 shows
the location of the Ethernet port.
Figure 3-7. Ethernet Port
The following Ethernet protocols are supported:
• IEEE 802.3, 10/100Base-T
• IEEE 802.1Q
• IEEE 802.1P User Defined VLAN Priority (upstream)
• DHCP Client Mode for Management
•SNMP
• Ethernet frame sizes up to 1,522 bytes
Ethernet Connection