Modem Installation And Maintenance Practice
Table Of Contents
- Total Access 1240 Installation and Maintenance Practice
- Front Matter
- Section 1, Introduction
- Section 2, Application Guidelines
- Section 3, Installation
- Section 4, Provisioning Defaults
- Section 5, User Interface
- Introduction
- System Management
- Logging on to the Total Access 1240
- Menu Structure
- Menu Navigation
- Menu Trees
- Menu Descriptions
- Configuration Screen
- Bridge Circuit Management Menu
- System Management Menu
- SHDSL Ports Menu
- System Alarm Log Screen
- Contact Information Screen
- Section 6, Maintenance
- Section 7, Specifications
- Appendix A, Declaration of Conformity
- Appendix B, SCA File Format
- Appendix C, Warranty
Section 3, Installation - Mounting the Total Access 1240
61179605L5-5B 3-5
Mid-mount
For mid-mount systems, the Total Access 1240 must be mounted from the front of the rack,
with mounting brackets in the mid-mounting orientation (see Figure 3-3). For mid-mounting
a Total Access 1240 in the rack, use a #2 phillips-head screwdriver and attach the mounting
brackets to the rear set of threaded screw holes with the flanges containing the slotted rack-
mounting holes facing the front of the Total Access 1240.
Using four screws appropriate for the mounting rack and the appropriate screwdriver, secure
the Total Access 1240 in place on the rack.
Figure 3-3. Mid-mount Orientation
FRONT
BACK
Mid-mount Orientation
P/N 3265540-1
P/N 3265540-2
19-inch Mounting Brackets
23-inch Mounting Brackets