Modem Installation And Maintenance Practice
Table Of Contents
- Total Access 1240 Installation and Maintenance Practice
- Front Matter
- Section 1, Introduction
- Section 2, Application Guidelines
- Section 3, Installation
- Section 4, Provisioning Defaults
- Section 5, User Interface
- Introduction
- System Management
- Logging on to the Total Access 1240
- Menu Structure
- Menu Navigation
- Menu Trees
- Menu Descriptions
- Configuration Screen
- Bridge Circuit Management Menu
- System Management Menu
- SHDSL Ports Menu
- System Alarm Log Screen
- Contact Information Screen
- Section 6, Maintenance
- Section 7, Specifications
- Appendix A, Declaration of Conformity
- Appendix B, SCA File Format
- Appendix C, Warranty
Total Access 1240 Installation and Maintenance Practice
3-4 61179605L5-5B
Flush-mount
For flush-mount systems, the Total Access 1240 must be mounted from the front of the rack,
with mounting brackets in the flush-mounting orientation (see Figure 3-2). When flush-
mounting a Total Access 1240 in the rack, use a #2 phillips-head screwdriver and attach the
mounting brackets to the front set of threaded screw holes with the flanges containing the
slotted rack-mounting holes facing the front of the Total Access 1240.
Using four screws appropriate for the mounting rack and the appropriate screwdriver, secure
the Total Access 1240 in place on the rack.
Figure 3-2. Flush-mount Orientation
FRONT
BACK
P/N 3265540-1
Flush-mount Orientation
P/N 3265540-2
19-inch Mounting Brackets
23-inch Mounting Brackets