Modem Installation And Maintenance Practice
Table Of Contents
- Total Access 1240 Installation and Maintenance Practice
- Front Matter
- Section 1, Introduction
- Section 2, Application Guidelines
- Section 3, Installation
- Section 4, Provisioning Defaults
- Section 5, User Interface
- Introduction
- System Management
- Logging on to the Total Access 1240
- Menu Structure
- Menu Navigation
- Menu Trees
- Menu Descriptions
- Configuration Screen
- Bridge Circuit Management Menu
- System Management Menu
- SHDSL Ports Menu
- System Alarm Log Screen
- Contact Information Screen
- Section 6, Maintenance
- Section 7, Specifications
- Appendix A, Declaration of Conformity
- Appendix B, SCA File Format
- Appendix C, Warranty
Section 3, Installation - Mounting the Total Access 1240
61179605L5-5B 3-3
MOUNTING THE TOTAL ACCESS 1240
The Total Access 1240 is shipped with two sets of mounting brackets that accommodate either
a 19-inch or 21-inch rack.
• The mounting brackets used for a 19-inch rack are part number 3265540-1.
• The mounting brackets used for a 23-inch rack are part number 3265540-2.
The mounting brackets provide for flush or mid-mounting configurations. Figure 3-1 shows
the Total Access 1240 mounting bracket installation options. Four screws (supplied with the
unit) are required for mounting the brackets to the system.
Figure 3-1. Mounting Brackets
FRONT
BACK
P/N 3265540-1
Mounting brackets - 19-inch rack
FRONT
BACK
P/N 3265540-2
Mounting brackets - 23-inch rack