Modem Installation And Maintenance Practice
Table Of Contents
- Total Access 1240 Installation and Maintenance Practice
- Front Matter
- Section 1, Introduction
- Section 2, Application Guidelines
- Section 3, Installation
- Section 4, Provisioning Defaults
- Section 5, User Interface
- Introduction
- System Management
- Logging on to the Total Access 1240
- Menu Structure
- Menu Navigation
- Menu Trees
- Menu Descriptions
- Configuration Screen
- Bridge Circuit Management Menu
- System Management Menu
- SHDSL Ports Menu
- System Alarm Log Screen
- Contact Information Screen
- Section 6, Maintenance
- Section 7, Specifications
- Appendix A, Declaration of Conformity
- Appendix B, SCA File Format
- Appendix C, Warranty
61179605L5-5B 3-1
Section 3
Installation
INTRODUCTION
CAUTION
Electronic units can be damaged by ESD. When handling a unit,
wear an antistatic discharge wrist strap to prevent damage to elec-
tronic components. Place units in antistatic packing material when
transporting or storing. When working on units, always place them
on an approved antistatic mat that is electrically grounded.
After unpacking the Total Access 1240, inspect it for damage. If damage has occurred, file a
claim with the carrier then contact ADTRAN Customer Service. Refer to “Appendix C,
Warranty” for further information. If possible, keep the original shipping container for
returning the Total Access 1240 for repair or for verification of shipping damage.
C A U T I O N !
SUBJECT TO ELECTROSTATIC DAMAGE
OR DECREASE IN RELIABILITY.
HANDLING PRECAUTIONS REQUIRED.