Modem Installation And Maintenance Practice
Table Of Contents
- Total Access 1240 Installation and Maintenance Practice
- Front Matter
- Section 1, Introduction
- Section 2, Application Guidelines
- Section 3, Installation
- Section 4, Provisioning Defaults
- Section 5, User Interface
- Introduction
- System Management
- Logging on to the Total Access 1240
- Menu Structure
- Menu Navigation
- Menu Trees
- Menu Descriptions
- Configuration Screen
- Bridge Circuit Management Menu
- System Management Menu
- SHDSL Ports Menu
- System Alarm Log Screen
- Contact Information Screen
- Section 6, Maintenance
- Section 7, Specifications
- Appendix A, Declaration of Conformity
- Appendix B, SCA File Format
- Appendix C, Warranty

Total Access 1240 Installation and Maintenance Practice
B-4 61179605L5-5B
:LocSTULineProvisioning 24 (Values are in Hex)
: LocSTULineProvisioning 24 Internal Variable Name (Do not Change)
C: 1| 2| 3| 4| 5| 6| 7| 8| 9| A| B| C| D| E| F| 10| 11|
12| 13| 14| 15| 16| 17| 18| 19| 1A| 1B| 1C| 1D| 1E| 1F| 20| 21| 22|
23| 24| 25| 26| 27
Column Header (Do not Change)
-----------------------------------------------------------------------------------
-----------------------------------------------------------------------------------
----------------------------
Column Separator (Do not Change)
26, 0, 0, 0, 0, 0, 1, 0, 0, 0, 2, 0, 20, 20, 20, 0, 0,
0, 0, 0, 0, e, 12, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, ad
See Table B-5 below by column number
...
Table B-4. LocSTUCardProvisioning
Column Option Values
1 Number of Options Do not change
2 Card Service State 0 = SERVICE_STATE_IN_SERVICE
1 = SERVICE_STATE_OOS_UNASSIGNED
2 = SERVICE_STATE
3 Powerdown Timeout 0 = Disabled
1 to 999 = timeout in minutes
4 Fan Alarm Delay 0 = Disabled
1 to 15 = delay in minutes
5 - 8 RESERVED for Future Use
Table B-5. LocSTULineProvisioning
Column Option Values
1 Number of options Do not change
2 Line Service State 0 = SERVICE _STATE_IN_SERVICE
1 = SERVICE_STATE_OOS_UNASSIGNED
2 = SERVICE_STATE_OOS_MAINTENANCE
3 SHDSL SNR Margin Alarm
Threshold
0 = Disabled
1 to 15 = threshold in dB
4 SHDSL Loop Attenuation Alarm
Threshold
0 = Disabled
1 to 127 = threshold in dB
5 SHDSL Loopback Timeout 0 = Disabled
1 to 4096 = timeout in minutes
6 Unit Mode 0 = STUC
1 = STUR