Modem Installation And Maintenance Practice
Table Of Contents
- Total Access 1240 Installation and Maintenance Practice
- Front Matter
- Section 1, Introduction
- Section 2, Application Guidelines
- Section 3, Installation
- Section 4, Provisioning Defaults
- Section 5, User Interface
- Introduction
- System Management
- Logging on to the Total Access 1240
- Menu Structure
- Menu Navigation
- Menu Trees
- Menu Descriptions
- Configuration Screen
- Bridge Circuit Management Menu
- System Management Menu
- SHDSL Ports Menu
- System Alarm Log Screen
- Contact Information Screen
- Section 6, Maintenance
- Section 7, Specifications
- Appendix A, Declaration of Conformity
- Appendix B, SCA File Format
- Appendix C, Warranty
Total Access 1240 Installation and Maintenance Practice
5-84 61179605L5-5B
SHDSL Loop 1 Local Loopback Menu
The SHDSL Loop 1 Local Loopback menu (see Figure 5-63), is used to perform and view local
loopback tests. For troubleshooting purposes, the Total Access 1240 provides three types of
local loopbacks:
•Dual-Sided
• Customer
•Network
Figure 5-63. SHDSL Loop 1 Local Loopback Menu
The SHDSL Loop 1 Local Loopback menu options are shown in Table 5-59.
Table 5-59. SHDSL Loop 1 Loopback Menu Options
Option Description Function
1 Dual-Sided This option is used to initiate a dual-sided loopback. For
more information, refer to “Local Dual-Sided Loopback”
on page 5-85.
2 Customer This option is used to initiate a customer side loopback.
For more information, refer to “Local Customer
Loopback” on page 5-85.
3 Network This option is used to initiate a network side loopback.
For more information, refer to “Local Network Loopback”
on page 5-85.
09/01/05 03:05
Total Access 1240
SHDSL Loop 1 Local Loopback
1. Dual-Sided
2. Customer
3. Network
Selection:
'N' - Next Loop 'P' - Prev Loop 'S' - Select Loop '?' - System Help