Modem Installation And Maintenance Practice
Table Of Contents
- Total Access 1240 Installation and Maintenance Practice
- Front Matter
- Section 1, Introduction
- Section 2, Application Guidelines
- Section 3, Installation
- Section 4, Provisioning Defaults
- Section 5, User Interface
- Introduction
- System Management
- Logging on to the Total Access 1240
- Menu Structure
- Menu Navigation
- Menu Trees
- Menu Descriptions
- Configuration Screen
- Bridge Circuit Management Menu
- System Management Menu
- SHDSL Ports Menu
- System Alarm Log Screen
- Contact Information Screen
- Section 6, Maintenance
- Section 7, Specifications
- Appendix A, Declaration of Conformity
- Appendix B, SCA File Format
- Appendix C, Warranty
Section 5, User Interface - Menu Descriptions
61179605L5-5B 5-83
SHDSL Loop 1 Test Menu
The SHDSL Loop 1 Test menu (see Figure 5-62) is used to set testing for the SHDSL local or
remote loopbacks.
Figure 5-62. SHDSL Loop 1 Test Menu
The SHDSL Loop 1 Test menu options are shown in Table 5-58.
Table 5-58. SHDSL Loop 1 Test Menu Options
Option Description Function
1 Local Loopback This option displays the “SHDSL Loop 1 Local Loopback
Menu” on page 5-84.
2 Remote Loopback This option displays the “SHDSL Loop 1 Remote
Loopback Menu” on page 5-86.
09/01/05 03:14
Total Access 1240
SHDSL Loop 1 Test
1. Local Loopback : Inactive
2. Remote Loopback : N/A
Selection:
'N' - Next Loop 'P' - Prev Loop 'S' - Select Loop '?' - System Help