Modem Installation And Maintenance Practice
Table Of Contents
- Total Access 1240 Installation and Maintenance Practice
- Front Matter
- Section 1, Introduction
- Section 2, Application Guidelines
- Section 3, Installation
- Section 4, Provisioning Defaults
- Section 5, User Interface
- Introduction
- System Management
- Logging on to the Total Access 1240
- Menu Structure
- Menu Navigation
- Menu Trees
- Menu Descriptions
- Configuration Screen
- Bridge Circuit Management Menu
- System Management Menu
- SHDSL Ports Menu
- System Alarm Log Screen
- Contact Information Screen
- Section 6, Maintenance
- Section 7, Specifications
- Appendix A, Declaration of Conformity
- Appendix B, SCA File Format
- Appendix C, Warranty
Section 5, User Interface - Menu Descriptions
61179605L5-5B 5-75
SHDSL Loop 1 G.991.2 Annex Menu
The SHDSL Loop 1 G.991.2 Annex menu (see Figure 5-55) is used to select the annex for the
SHDSL loop.
Figure 5-55. SHDSL Loop 1 G.991.2. Annex Menu
The SHDSL Loop 1 G.991.2 Annex menu options are shown in Table 5-54.
Table 5-54. SHDSL Loop 1 G.991.2 Annex Menu Options
Option Description Function
1 A This option is used to specify Annex A. Annex A is used
for North American applications.
2 B This option is used to specify Annex B. Annex B is used
for European applications.
3 A/B This option is used to specify that the Total Access 1240
is to auto-detect the setting of the attached device.
09/01/05 03:10
Total Access 1240
SHDSL Loop 1 G.991.2 Annex
1. A
2. B
3. A/B
Selection:
'?' - System Help