Modem Installation And Maintenance Practice
Table Of Contents
- Total Access 1240 Installation and Maintenance Practice
- Front Matter
- Section 1, Introduction
- Section 2, Application Guidelines
- Section 3, Installation
- Section 4, Provisioning Defaults
- Section 5, User Interface
- Introduction
- System Management
- Logging on to the Total Access 1240
- Menu Structure
- Menu Navigation
- Menu Trees
- Menu Descriptions
- Configuration Screen
- Bridge Circuit Management Menu
- System Management Menu
- SHDSL Ports Menu
- System Alarm Log Screen
- Contact Information Screen
- Section 6, Maintenance
- Section 7, Specifications
- Appendix A, Declaration of Conformity
- Appendix B, SCA File Format
- Appendix C, Warranty
Total Access 1240 Installation and Maintenance Practice
5-74 61179605L5-5B
SHDSL Loop 1 Rate Screen
The SHDSL Loop 1 Rate screen (see Figure 5-54) is used to set the rate for the Circuit ID.
Figure 5-54. SHDSL Loop 1 Rate Screen
The rates defined in SHDSL standard G.991.2 are N × 64 kbits/s, where N = 3 (192 kb/s) to
36 (2304 kb/s).
09/01/05 03:09
Total Access 1240
SHDSL Loop 1 Rate
Enter a value for N from 3 to 36, where
the payload rate = N x 64 Kbps:
'?' - System Help