Modem Installation And Maintenance Practice
Table Of Contents
- Total Access 1240 Installation and Maintenance Practice
- Front Matter
- Section 1, Introduction
- Section 2, Application Guidelines
- Section 3, Installation
- Section 4, Provisioning Defaults
- Section 5, User Interface
- Introduction
- System Management
- Logging on to the Total Access 1240
- Menu Structure
- Menu Navigation
- Menu Trees
- Menu Descriptions
- Configuration Screen
- Bridge Circuit Management Menu
- System Management Menu
- SHDSL Ports Menu
- System Alarm Log Screen
- Contact Information Screen
- Section 6, Maintenance
- Section 7, Specifications
- Appendix A, Declaration of Conformity
- Appendix B, SCA File Format
- Appendix C, Warranty
Total Access 1240 Installation and Maintenance Practice
5-72 61179605L5-5B
SHDSL Loop 1 Service State Menu
The SHDSL Loop 1 Service State menu (see Figure 5-52) is used to set the loop service state.
The default value is Out of Service-Maintenance.
Figure 5-52. SHDSL Loop 1 Service State Menu
The SHDSL Loop 1 Service State menu options are shown in Table 5-52.
Table 5-52. SHDSL Loop 1 Service State Options
Option Description Function
1 In Service This option makes SHDSL services available, if installed,
and Link Down and Threshold alarms are reported.
2 Out of Service-Unassigned This option makes SHDSL services unavailable, and no
Link Down and Threshold alarms are reported.
3 Out of Service-Maintenance This option makes SHDSL services available, and no
Link Down and Threshold alarms are reported.
09/01/05 03:58
Total Access 1240
SHDSL Loop 1 Service State
1. In Service
2. Out of Service - Unassigned
3. Out of Service - Maintenance
Selection:
'?' - System Help