Modem Installation And Maintenance Practice
Table Of Contents
- Total Access 1240 Installation and Maintenance Practice
- Front Matter
- Section 1, Introduction
- Section 2, Application Guidelines
- Section 3, Installation
- Section 4, Provisioning Defaults
- Section 5, User Interface
- Introduction
- System Management
- Logging on to the Total Access 1240
- Menu Structure
- Menu Navigation
- Menu Trees
- Menu Descriptions
- Configuration Screen
- Bridge Circuit Management Menu
- System Management Menu
- SHDSL Ports Menu
- System Alarm Log Screen
- Contact Information Screen
- Section 6, Maintenance
- Section 7, Specifications
- Appendix A, Declaration of Conformity
- Appendix B, SCA File Format
- Appendix C, Warranty
Total Access 1240 Installation and Maintenance Practice
5-66 61179605L5-5B
SHDSL Loop 1 Configuration Screen
The SHDSL Loop 1 Configuration
screen (see Figure 5-47) displays information about the
system. For instance, the part number can be used to search for related information on the
ADTRAN website or to order additional parts. The software revision can be required when
calling ADTRAN Technical Support.
Figure 5-47. SHDSL Loop 1 Configuration Screen
NOTE
The Loop number displayed indicates the current loop number
being viewed or provisioned.
There are two descriptors for each SHDSL field:
• LTU – Line Terminating Unit
• NTU – Network Terminating Unit
The SHDLSL Loop 1 Configuration fields are shown in Table 5-48.
09/01/05 03:57
Total Access 1240
SHDSL Loop 1 Configuration
LTU NTU
Vendor ID : ADTN N/A
Part Number : 1179605L5 N/A
Serial Number : E49A1314 N/A
Product Revision : A N/A
Manufacture Date : N/A
CLEI Code : N/A
SHDSL Version : 01 N/A
Vendor List Number : 1 N/A
Vendor Issue Number : 1 N/A
Boot Revision : A01.00 N/A
Software Revision : A03.30 (Flash A) N/A
Software Checksum : E215 N/A
'N' - Next Loop 'P' - Prev Loop 'S' - Select Loop '?' - System Help