User manual

Appendix A. Dial Plan Interface Configuration
61200314L1-1 Dual T1/PRI Module User Manual A-11
DS0
S
A
VAILABLE
Read security: 5
Indicates whichDS0s of the T1 have been defined in thisswitched endpoint
(indicated by “! “), in another switched endpoint (indicated by “s”), or in a
dedicated map (indicated by “n”).
S
IGNALING
M
ETHOD
Write security: 3; Read security: 5
Defines to the ATLAS 550 the type of signaling to be used across this trunk.
The selected signaling must match that being used by the user equipment
(PBX). The choices are as follow:
FGD T
X
S
EQUENCE
Write security: 3; Read security: 5
Defines to the ATLAS 550 the format in which to present the outgoing dig-
its. Choose N
ORMAL
ifnodigitsaretobesent;chooseANI/DNIS tosend
both ANI and DNIS. Choose DNIS to send DNIS only, and choose ANI to
send ANI only.
FGD R
X
S
EQUENCE
Write security: 3; Read security: 5
Defines to the ATLAS 550 the format in which to receive the outgoing dig-
its. Choose N
ORMAL
ifnodigitsaretobereceived;chooseANI/DNIS to
receive both ANI and DNIS. Choose DNIS to receive DNIS only, and choose
ANI to receive ANI only.
W
INK AFTER
ANI/
DNIS
Write security: 3; Read security: 5
When enabled, the ATLAS 550 will transmit a wink after ANI/DNIS digits
are transmitted.
0-9 This DS0 is available. The digit that displays in this field represents
the last digit of the DS0 number.
* ThisportisrequestingthisDS0for this connection,buttheDS0isnot
yet activated.
! ThisDS0isusedbythisendpoint.
s This DS0 is used elsewhere in the switched D
IAL
P
LAN
.
S ThisDS0 is intheswitcheddialplan andconflicts withthisendpoint.
n This DS0 is used in one or more D
EDICATED
M
APS
.
N This DS0 is in one or more D
EDICATED
M
APS
and conflicts with this
endpoint.
• E&M Immediate • E&M Wink • Loop Start
• Ground Start • Feature Group D
The ATLAS 550 converts signaling types between network and user
terminations.