User manual

Appendix A. Dial Plan Interface Configuration
A-8 Dual T1/PRI Module User Manual 61200314L1-1
S
OURCE
ID
Write security: 3; Read security: 5
Simplifiesthecreationofa D
IAL
P
LAN
inapplications wherethecriterion for
switching calls to a certain endpoint is a function of which endpoint origi-
nated the call.
Default value = 0. The default ID for all endpoints is 0 and all accept
numbers is 0. With default values, all calls are routed based only on the
dialed number.
Multiple endpoints can have the same S
OURCE
ID.
When creatingtheC
ALL
A
CCEPT
list, specifya S
OURCE
ID(s)aswellasa
dialed number or range of dialed numbers to accept.
E
XAMPLE
:
An application requires that all calls that originate from Port 1 of the Dual
T1/PRI Module in Slot 1 be switched to Port 2 of that same module. Assign
a unique Source ID (e.g. 7) to Port 1 ofthe module, andthen configure Port
2 to only accept calls from that unique Source ID (7).
DUAL T1/PRI MODULE: USER TERMINATION/PRI
When you are working in the user termination section of the D
IAL
P
LAN
menu, when S
LT
is defined as a T1/PRI-2,andwhenS
IG
is set to PRI, thefol-
lowing configuration options are available:
S
WITCH
T
YPE
Write security: 3; Read security: 5
Defines the type of PRI switch that the ATLAS 550 is going to emulate. If
connected to another ATLAS 550, both need to be set to the same switch
type.
F
IRST
DS0
Write security: 3; Read security: 5
Defines to the ATLAS 550 the first DS0 for this endpoint. The ATLAS 550
uses DS0s, starting with this selection, to send andreceive calls toand from
the network (PSTN). The outgoing calls which are allowed or restricted
over these DS0s are set by the O
UTGOING
C
ALL
A
CCEPT
and R
EJECT
N
UM
-
BERS
(discussed in the ATLAS 550 User Manual).
N
UMBER OF
DS0
S
Write security: 3; Read security: 5
Specifies the number of DS0sATLAS 550 uses for this endpoint.
S
TRIP
MSD
Write security: 3; Read security: 5
Strips a selected quantity(choose fromNONE
, 1, 2,and3)oftheMostSignif-
icant Digits (MSD) of a dialed number prior to being forwarded out of the
port.
•Lucent5E •NorthernDMS100
Nation ISDN AT&T 4ESS