Specifications

Serial Interface Configuration Command Set Command Reference Guide

serial-mode <mode>

Use the serial-mode command to specify the electrical mode for the interface. Use the no form of this

command to return to the default value.

Syntax Description

<mode>

Specifies the electrical specifications for the interface

V35

Configures the interface for use with the V.35 adapter cable (P/N 1200873L1)

X21

Configures the interface for use with the X.21 adapter cable (P/N 1200874L1)

Default Values

<mode> V35

Command Modes

(config-ser 1/1)# Serial Interface Configuration Mode required

Command History

Release 1.1 Command was introduced

Functional Notes

The pinouts for each of the available interfaces may be found in the Hardware Configuration Guide located on

the

NetVanta 3000 Series System Manual

CD (provided in shipment).

Usage Examples

The following example configures the serial interface to work with the X.21 adapter cable:

(config)#

interface serial 1/1

(config-ser 1/1)#

serial-mode X21