Specifications

Command Reference Guide IKE Policy Command Set

attribute <policynumber>

Use the attribute command to define attributes for the associated IKE policy. Multiple attributes can be

created for a single IKE policy. Once you enter this command, you are in the IKE Policy Attribute

command set. Refer to IKE Policy Attributes Command Set on page 270 for more information.

Syntax Description

Assign a number (range: 1-65535) to the attribute policy.

The number is the

attribute’s priority number and specifies the order in which the resulting VPN

proposals get sent to the far-end.

This command takes you to the

(config-ike-attribute)#

prompt. From here, you

can configure the settings for the attribute as outlined in the section

IKE Policy

Attributes Command Set

on page 270.

Default Values

By default, no attribute is defined.

Command Modes

(config-ike)# IKE Policy Configuration Mode

Command History

Release 4.1 Command was introduced

Functional Notes

Multiple attributes on an IKE policy are ordered by number (with the lowest number representing the highest

priority).

Usage Examples

The following example defines a policy attribute (

) and takes you into the IKE Policy Attributes command set:

(config-ike)#

attribute 10

(config-ike-attribute)#