Specifications

Command Reference Guide Enable Mode Command Set

Functional Notes

The link-state-id differs depending on whether the link state advertisement in question describes a network or a

router.

If describing a network, this ID is one of the following:

• The network’s IP address. This is true for type 3 summary link advertisements and in autonomous

system external link advertisements.

• An address obtained from the link state ID. If the network link advertisement’s link state ID is masked

with the network’s subnet mask, this will yield the network’s IP address.

If describing a router, this ID is always the router’s OSPF router ID.

Usage Examples

enable

show ip ospf database