Setup guide

Polycom UC Software 4.0.4 Release Notes
84
35245 Line key behavior (configurable) has changed such that keys can now be used to hang-
up/terminate calls as well as establishing calls. The associated configuration parameter
is
up.lineKeyCallTerminatetype=Booldefault=0 min=0 max=1.
38826 Added configuration parameters to expand the range of ports as well as to randomize
port selection for the purpose of downloading configuration files to the phone using TCP
connections.
48138 Added support for dynamic support of G.729AB and iLBC codecs. G.729AB / iLBC
(applies to SoundPoint IP 320, 321, 330, 331, 335, 450, 550, 560, 650, 670).
48526 Simplified selection of codec configuration preferences. See Technical Bulletin 60519
for
more information. This change is not backward compatible to configuration files used
with previous software releases.
48690 Added the ability for users to lock the phone and restrict its access from unauthorized
users. Users must enter a PIN in order to access and use the phone. Refer to
Quick Tip
57215 for more information regarding this feature and configuration.
49658 Added configuration parameter to allow the phone to obtain Caller ID from the From
header instead of the P-Asserted-Identity segment. The associated configuration
parameter is
voIpProt.SIP.CID.sourcePreference = P-Asserted-Identity, Remote-
Party-ID, or From.
50067 Local contact directory now matches the Polycom CMA products style and user
experience.
50151 Removed redundant levels of abstraction associated with arrays in configuration files.
50644 Enhanced the visual indicator of incoming calls on the VVX 1500 for the hearing
impaired. Upon receiving an incoming call, the phone will ring and the display will flash
on and off with a bright orange and white screen. This visual indicator can be seen even
when the display is viewed at an indirect angle. The associated configuration parameter
is
up.accessibilityFeatures=1.
51121 RAM disk configuration parameters have been optimized.
51314 Added a configuration option to allow for minimal latency in order to meet JITC
requirements.
The associated configuration parameter is
voice.txPacketDelay.
Normal or NULL (default) = no change to Tx latency; low = low delay
51523 Added the ability to scroll horizontally caller ID information (if it is truncated when the
number of characters in the caller ID string exceeds the capacity of the display).
51446 Added configuration parameters supporting TLS cipher suites.
51594 Digit map replacements no longer need to be reflected in the placed calls list.
51725 Added support for G.719 audio codec in H.323 calls (applies to VVX 1500).
51979 Added support for asymmetric audio codecs.