Setup guide

Polycom UC Software 4.0.4 Release Notes

62036 The SoundPoint IP 320 and 330 phones now send DTMF RTP EVENTS when receiving

a second incoming call during an active primary call.

62114 The user can now unlock the VVX 1500 phone after the phone is locked with a password

containing letters.

62325 Chinese characters no longer cause the VVX 1500 phone to become unresponsive to

user requests.

62333 The correct Chinese characters are displayed in the reboot menu on the VVX 1500.

62417 When an off-hook event is received from the headset base station, the phone no longer

sends three events to the base station in DHSG headsets and platforms.

62453 The phone no longer displays a ghost call appearance labeled Unknown Party if a

remote party is held while the reorder tone is played locally.

62490 Enabling the Screen capture function with

httpd.enabled=0 no longer causes the

phone to freeze and reboot.

62576 The phone now reboots in order to pick up new sip.ld file after an Update Configuration

is invoked from the menu.

62642 The phone no longer plays a dial tone and RTP media when resuming on a call held at

another phone.

62704 BLA presence now recovers properly on the monitoring phone when the LAN cable is

disconnected and then re-connected.

62906 The phone correctly provisions using the HTTPS protocol option when using a server

certificate with an older MD2 digest message algorithm.

63076 Phones with BLA lines are now able to establish more than 10 outgoing calls.

63214 The phone no longer reboots if it receives more REFERs that

reg.x.callsPerLineKey

is configured for.

64742 Using a dial plan containing #, when a user goes off-hook and dials #1#2#, the phone

now sends out an invite message containing %231%232%23.

Configuration File Enhancements

Refer to Table 14: Software Version 3.3.1 – Configuration File Parameter Enhancements for a

list of changes in configuration parameters. The list applies only to the changes made since UC

software 3.3.0.

The configuration files, their respective parameters and defaults, as well as the provisioning

methods have been simplified but extensively modified starting from UC software 3.3.0.

Before installing the software, it is highly recommended that you first familiarize yourself with the

changes outlined in the Administrators Guide for the Polycom

UC Software – 3.3.0 and

Technical Bulletin 60519.