Setup guide

Updates to Previous Software Releases
69
60733 Can now establish a local conference bridge by using a speed-dial key, BLF line key or
via call lists.
60984 The
dir.local.contacts.maxNum parameter no longer accepts 0 as stated in the
Administrators’ Guide;
dir.local.contacts.naxNum accepts 1 to 99 OR 1 to 9999.
61013 On the VVX 1500, the Call Rate value can no longer be set higher than Max Call Rate
value when configured using the Web Configuration Utility.
61067 On the phone interface menu, pressing the Back soft key in the Authentication menu
now restores the menu title correctly.
61089 A pop-up no longer appears when adjusting the ringer volume while the call is on hold.
Handsfree Volume no longer appears instead of Ringer Volume (applies to SoundPoint
IP 320, 321, 330, 331, and 335).
61145 The
dialplan.digitmap uses up to a maximum of 767 characters. The last character is
no longer truncated.
61147 The phone no longer reboots when a GET request is sent to the phone to
/TA/getParam?paramName=reg.1.ringType (applies to SoundPoint IP 331, 335, 450,
550, 560, 650, 670 and SoundStation IP 5000).
61316 The message waiting indicator (MWI) on the VVX 1500 shows up on the correct line
after the registrations are moved to different line keys.
61955 An RTP audio delay is no longer detected when calling or receiving calls from a PSTN
line.
62389 When the VVX 1500 phone is left idle for an extended period of time and a call is made
between the CMA users, the pop-up on the phone user interface is no longer delayed for
both incoming and outgoing H.323 calls.
62450 When the value in configuration parameter
mb.idleDisplay.home is set to point to a
URL with an image, the phone’s idle display no longer shows a break in the border
located at the bottom-left corner.
62664 The VVX 1500 phones no longer drop the domain information when sending call setup
to the gatekeeper.
62675 Calls placed with the VVX 1500 using the URL dialing now show up in the missed calls
list.
62687 Disabling local call forward now stops the phone from forwarding calls.
62974 Local call forwarding rules are now disabled when the feature is disabled.
63070 Call Forward (CF) messages such as Call Forward destination:Fwd:<number> now
display when DND is active.
63262 When using the SoundPoint 650 to dial a call using the Out of Dialog REFER based
method, the user no longer needs to press the Speakerphone key twice in order to
terminate the call.