Setup guide

Polycom UC Software 4.0.4 Release Notes
28
76730 Enhanced the digitmap by removing the prepending ‘+’ to the outbound calls and giving
the option of configuring the “+” in the dial plan (applies to Lync mode only). Note: For
more information on digitmap, refer to the Microsoft Lync Interoperability section.
77038 Added support for early media followed by local ring back.
Enhanced Capabilities
73667 The syslog counter on the SpectraLink 8400 phones are updated accordingly when
audio packets are received.
75557 On the web interface of the phone, the logging module parameter Wi-Fi Manager log
value is updated in the field help section when the mouse is over parameter name as
well as its value as (applies to SpectraLink 8400).
76057 When a phone is registered with a single shared line, the Join soft key is no longer
displayed inappropriately when the monitored phone puts the call on hold.
76084 In a shared BLF line scenario, the monitoring phone no longer resumes the call from the
monitored phone without playing any busy tone.
76095 In a shared BLF line scenario, phone now displays the incoming call status of the
monitored phone (applies to VVX 500).
76131 The phone default call appearance eliminates the display of remote on hold calls
(applies to VVX 500).
76321/76515 The phone does not reboot when multiple URI’s are pushed to the phone in
frequent intervals. (Customer issue ID
VESC-1635, VESC-1650).
76427 The phone displays only the incoming call received from a line that is also being
monitored using BLF (used to display this as two calls in the list) (applies to VVX 500).
76467 Improved Call list display for caller ID with long names (applies to VVX 1500).
76591 The phones display the correct Asian language fonts for the Lync contacts.
76679 Unauthorized request for configuration files using phone web interface is now restricted.
76754 The Filtered call view of a BLF-monitored line is shown properly when the phone is in
off-hook state.
76862 During an active BLF call session, frequent pressing of the BLF key on the origination
phone no longer causes the caller ID information to be blanked out.
76889 The PPT key can now be configured as a Speed dial key on the SpectraLink 8400
phones.
76911 The dialer screen UI on the phone is refreshed when an incoming ringing call is
terminated.
76934 On-hook dialing work as expected when the phone has an incoming call and the remote
party ends the call.