Setup guide

What’s New for Polycom UC Software 4.0.4?
21
Configuration File Enhancements
Refer to the following table for a list of all enhancements made to the UC software 4.0.4
configuration file parameters.
Table 7: Software Version 4.0.4 – Configuration File Parameter Enhancements
File Modification Parameter Default Permitted
Values
feature Added
reg.X.teluri
0 0 or 1
feature
Added
voIpProt.SIP.supportFor100rel
1
0 or 1
feature Added
video.dynamicControlMethod
0 0 or 1
feature Added
video.forceRtcpVideoCodecControl
0 0 or 1
feature Added
voIpProt.SIP.useLocalTargetUri
ForLegacyPickup
0 0 or 1
feature Added
reg.1.useLocalTargetUriFor
LegacyPickup
0 0 or 1
feature Added
voIpProt.SIP.fmtpMustForG7221
0 0 or 1
feature Added
voIpProt.SDP.offer.rtcpVideoCodec
Control
0 0 or 1
feature Added
tcpIpApp.sntp.Aquery
0 0 or 1
feature Added
lcl.datetime.date.dateTop
1* 0 or 1
feature Added
lcl.ml.lang.clock.X.dateTop
1* 0 or 1
feature Added
pstn.fxsType
CO 0 to 256
feature Added
dialplan.digitmap.timeOut
3|3|3|3|3|3|3 0 to 768
Note: Also refer to configuration parameter changes in UC software 4.0.3 Rev F, 4.0.2 Rev B and 4.0.2.
*This value is ‘0’ by default for the VVX 500.