Setup guide

Polycom UC Software 4.0.4 Release Notes
20
75983 The web user interface of the phone now displays the "Software Upgrade" page without
any issue.
75783 The phone no longer switches to ‘UDP on 401 Unauthorized Response’ when the
protocol is set to “TCP Preferred”.
75762 Dialing SIP numbers on the phone containing ‘*’ or ‘#’ will no longer display the contact
in URI format.
75699 Playing a media file continuously on the web browser no longer causes any memory
issues on the phone.
75634 Call forward status is now displayed on the status bar of the phone when Call
Forwarding No Answer and Call Forwarding Busy are enabled/disabled by the Broadsoft
Feature Access Code.
75134 The phone now accepts a URL as server address in the Boot server menu and
provisions the phone accordingly.
74553 Pressing the DIR soft key on the phone will no longer cause a reboot when the LDAP
server is not available (applies to SoundPoint IP 331 and IP 335).
74549 Plantronics EHS option now gets selected automatically in the phone “HookSwitch
mode” menu when the parameter
up.up.analogHeadsetOption is set to 2 (applies to
SoundPoint IP 331 and IP 335).
73898 Audio quality for the PSTN calls is improved and no longer plays unwanted noise.
73426 Multiple issues related to phone lock/unlock are addressed.
73396/75333 The idle browser no longer shows "Invalid Hostname" message on the phone’s
screen after a reboot or restart.
72933 The phone’s BootROM now supports M-TLS during ZTP provisioning (applies to VVX
1500).
72599 The phone now updates the time and date correctly for the GMT offsets 1.5, 2.5, and 4.5
when configured to STNP server (applies to VVX 1500).
70072 "Please try again" pop-up message is now displayed on the phone’s screen when the
call forward setting is rejected by the server.
63452 When URL dialing is disabled on the phone, transferring call initiated by the BLF speed
dial key no longer prompts again for the URL.