Setup guide

Polycom UC Software 4.0.4 Release Notes

79487 In a BLF scenario, the phone retains the soft keys on the idle screen when there is an

incoming call for one of the monitored lines.

79330 The phone now allows the STP traffic from the phone’s PC port.

79054 Phone now establishes a three-way conference successfully when the TLS and SRTP

are enabled, and the

voIpProt.SIP.conference.address parameter is set on the

Siemens OSV6 server.

78998 Quickly double pressing the Hold soft key/button no longer indicates a false "held state"

on the phone's screen and LED.

78885 Spending a longer time using notification events on the phone will no longer cause any

memory leak.

78719 Request validation feature is now working properly when the server transport is set to

UDP only.

78677 The phone now successfully returns to idle state from the microbrowser menu after the

idle screen timeout.

78648 Performance on the phone microbrowser has been improved.

78624 During provisioning, when DHCP fails during a reboot, the phone displays the DHCP

failed message on the BootROM menu and does not fetch the software.

78495 Timestamp in SIP PUBLISH will now show the call start time and end time information

along with dates, as per UTC standards (applies to SoundPoint IP 650).

78404 The speaker on the phone no longer plays any pop-up sound when trying to

increase/decrease the ringer volume.

78361 During the phone state polling, when an http request is passed, the call state handler

now returns the call line information for all the lines.

78342 In a BLF scenario, terminating a placed call to a BLF-monitored party using the

speakerphone or headset key is now available on the phone

78230 The phone’s performance is improved to work optimally in call center environments

(applies to SoundPoint IP 650).

78210 The phone no longer shows the held state on the phone's screen and LED by quickly

double pressing the Hold soft key/button.

78138 The call list information on the phone is now displayed for 40 seconds when accessed

through a soft key (applies to VVX 1500).

78071 SoundStucture now displays the correct Line label when the user registers a new line for

the second time.

77878 The phone now includes the Allow-Events header in its 200 OK after auto answering.

77877 Missed/received calls are now logged in the respective configured list when the

parameters

call.advancedMissedCalls.enabled and

call.advancedMissedCalls.addToReceivedList

are set.