Setup guide

Polycom UC Software 4.0.4 Release Notes

82139 Answering a call using EHS is now available on the phone when the BLF status is active

for any monitored user.

82081 The phone now allows the STP traffic from the phone’s PC port (applies to VVX 500).

82075 The phone is now able to park and retrieve the call successfully from the park orbit when

the parameters

reg.1.lineKeys and reg.1.callsPerLineKey are set to 1 (applies to

SoundStation IP 7000).

82068/82032/79780 Dialing a feature access code displays ‘#’ character correctly on the

phone's screen instead of '%23'.

82046 Added support for early media followed by local ring back.

82998 USB call recording no longer causes a reboot when the language on the phone is

configured as Russian (applies to VVX 1500).

81912/81913/81914 The provisioning of daisy chained phones has been optimized and is now

possible to have different software versions on diferent phones in the chain.

81910/81492 In DHCP mode, the phone now clears the released IP address from its menu.

81886 In a BLF scenario, the phone no longer displays call appearances of the monitored

phones to the hunt group when the parameter

attendant.behaviors.display.spontaneousCallAppearances is set to 0.

81828 In an ACD scenario, the phone stays on the current screen of the user before and after a

reSUBSCRIBE.

81823 The phone now correctly handles DHCP Inform packet broadcast within the networks

without any issue.

81639 The phone is now able to handle the bitrate mismatch during a call for G.722.1 codec by

setting the parameter

voIpProt.SIP.fmtpMustForG7221 to 1.

81597 Establishing an outbound call using the 'Click to call' browser plug-in is now working

properly and no longer causes a reboot on the phone.

81569/84310 Configured ringback tone is now played on the phone without any silence or

choppy noise.

81557 Guest sign-in now associates all the guest features on the host phone correctly.

81554 In a call center scenario, the phone now displays the correct status and soft keys on the

phone's screen after a reboot.

81549 The phone now sends the “subscribe” message immediately after registration in failover

scenarios.

81541/81410 In a call center scenario, the guest user is now able to sign out from the host

phone in a single attempt when the guest has already signed in and out once.

81504 In ACD Hoteling, the phone retains "Wrap-Up" state on REGISTER/SUBSCRIBE.