Setup guide

Updates to Previous Software Releases
141
61321 When a phone joins a centralized conference bridge, other monitoring phones correctly
show the BLA line as being on hold instead of being in use.
61547 The phone sends a 486 Busy message when a call (INVITE) is rejected. A binary
configuration parameter is added to sip.cfg called
voIpProt.SIP.use486forReject.
By default (parameter is 0), the feature is disabled. If the parameter equals 1, the feature
is enabled. If enabled, and the phone is indicating a ringing inbound call appearance,
then upon pressing the Reject soft key, the phone will transmit a 486 Response to the
originator of the received INVITE message.
61725 Users can pick up a held call after multiple hold/resume interactions on the phone.
61950/62024 The phone honors a retry-after header in a 500 Glare message responding to a
BLA re-SUBSCRIBE message.
62036 The SoundPoint IP 3xx phone continues sending DTMF RTP EVENTS when receiving a
second incoming call while it is already active on a previously established call.
62050 The SoundPoint IP 650 phone properly updates the number of held calls after sending
200 OK messages as part of the notifications process.
62127 The Blind transfer soft key on the SoundPoint IP 650 is presented on the display when
the Transfer soft key is pressed on the second call.
62223 The phone no longer crashes after resuming a held call using a BLA.
62226 The phone no longer proceeds to join a conference after receiving a 403 Forbidden from
the switch.
62262 The phone no longer establishes a 1-way audio path after it has re-established a
centralized conference call with the dropped third party. This behavior is observed with
Sylantro switches.
62279 The presence indicator on a Bridged Line Appearance displays correctly after the phone
receives a 486 message.
62313 Using a BLA configuration, a dial tone is present when pressing the second line key
followed by lifting handset after holding a call on first line appearance.
62361 The call status on a BLA Bridged Line Appearance (configured for 1 call per line
appearance) of a monitoring phone is updated correctly when transfer/conference soft
key is pressed.
62435 The SoundPoint IP 650 phone correctly displays a call appearance labeled Unknown
Party if the remote party is held while a reorder tone is played locally.
62511 In certain situations, the monitored Busy Lamp Field line invokes an incoming call
notification (icon and tone).
62514 In certain situations, the status of the monitored Busy Lamp Field lines on the
SoundPoint IP 670 is removed from the display even though the status has been
updated by the switch.