Setup guide

Polycom UC Software 4.0.4 Release Notes
98
62206 Phone no longer displays Service Unavailable upon lifting the handset and pressing the
Line 2 key (applies to SoundPoint IP 320, 321, 330, 331, and 335).
62226 The phones no longer join a conference after receiving a 403 Forbidden from the switch.
62383 A held call on a Bridged Line Appearance with remote phones is now presented (applies
to SoundPoint IP 601).
62567 SoundPoint IP 3xx phones, monitoring each other in a 2x2 BLA configuration, are now
able to pick up held calls.
62621 SoundPoint IP 3xx phones, configured for HTTPS, no longer display the error messages
Alert: Fatal, Description, Decode Error.
62642 Phones no longer play a dial tone as well as RTP audio when resuming a call held at
another phone.
62643 When the user presses both line keys (Line 1-hold and Line 2-Active call) simultaneously
on the SoundPoint IP 3xx, the active call on Line 2 is no longer dropped.
62669 Multiple phones no longer try to resume a held Bridged Line Appearance (BLA) line at
the same time.
62672 Directed Call Pickup DCP or Group Call Pickup feature (using soft keys instead of *53
and *54 feature access codes) no longer fail when the user enters an account code. The
account code is not appended to the user portion of the URI.
62855 Invoking either the Group Call Pickup or Directed Call Pickup feature, using its
corresponding soft key, now functions properly. The display shows Unknown and the call
is not picked up (applies to SoundPoint IP 3xx).
62902 The phone now accepts inbound SIP requests from an RROFO (Geo-redundancy)
server that is not registered with that phone.
62926 The Resume soft key on the SoundPoint IP 3xx is now presented when the line key is
pressed continuously while the line is in a remote held call state. This occurs when the
line is configured as
callsPerLineKey=1.
63099 The phone’s monitoring Bridged Line Appearance (BLA) line, configured for one call per
line, can now pick up the held call after the call on a BLA line has been put on hold using
the Transfer/Conference key.
63280 Regarding Geo-redundancy RROFO, calls on hold are now released when pressing the
Resume soft key after the IP BE failover occurs while using the geo-redundancy feature.
The user no longer needs to press the End Call soft key to complete the intended result.
63388 If a phone’s SIP lines are not registered with a call server, and the Emergency Call
Routing Feature is enabled (by configuring the
dialplan.routing.emergency.x.value and
dialplan.routing.emergency.x.server.y parameters) dialing the configured
emergency number will now work when you use on-hook dialing and when URL Dialing
is enabled.