Setup guide

Updates to Previous Software Releases
97
Configuration File Enhancements
Note that the configuration files, their respective parameters and defaults, as well as the
provisioning methods have been simplified but extensively modified compared to previous
releases.
Before installing the software, it is highly recommended that you first familiarize yourself with the
changes outlined in the Administrators Guide for the Polycom
®
UC Software – 3.3.0 and
Technical Bulletin 60519: Simplified Configuration Enhancements in Polycom® UC Software
3.3.0.
Understanding Updates to SIP 3.2.5
This section lists additions and changes, removals, enhancements, and configuration file
parameter changes to SIP 3.2.5 beside their respective Polycom tracking ID number.
New or Enhanced Features
59000 Phones now ignore BLA dialog documents sent within NOTIFY messages that are
reflected to User Agents that are party to the dialog.
62939 Various enhancements to the Geo-Redundancy (multiple server failover support)
feature. For full details, refer to the list of documents in Section 0.
64359 Bridged Line Appearance (BLA) line dialog rendering is now converted from No to Yes
on User Agents that are a remote party to the dialog.
Enhanced Capabilities
54219 The SoundPoint IP 560 and 670 phones now establish a data link when connected to
some switches when both phone and switch are configured for 100Mbits/Full Duplex.
57570 A failover is now performed as a result of a SIP Response code 503.
60851 Dialing using the Speaker or Headset key no longer drops the initial call appearance.
60973 Entering a username and password using the Quick Setup (QSetup) soft key followed by
a request to save, now automatically invokes the phone to reboot the phone in order to
the changes to be applied.
61248 After configuring a phone with 3 line registrations, while the second line is on hold, if a
user hot-dials using the speaker/headset termination key, the phone no longer
inadvertently seizes line 3 to dial out.
61283 The phone no longer incorrectly sends a NOTIFY with <param pname=+sip.rendering
pvalue=no /> when a user attempts to place a conference call on hold and the phone
receives a 400 Bad request.
61541 When a user attempts to place a conference on hold and the phone receives a 400 Bad
request, the phone correctly sends a NOTIFY with I=no. This no longer causes the
incorrect presence, on the other Bridged Line Appearance line, to be displayed.