Technical data

90362-01 Dial-In Users 9-7

Figure 9-5. The Remote IP User Screen

If you want to delete the currently selected user, move to the

Delete

field and press Enter. You are asked if you really want to delete the

interface. If you type

, the user is deleted and you return to the

Dial-in Users screen, where you can choose another user.

In the

Password

field, type the user’s password on their remote

workstation. In addition, if this user will be using PAP, you need to

set this password to correspond to the PAP “peer-passwd” on the

remote end.

In the

Crypto key

field, type the user’s crypto key. In addition, if this

user will be using CHAP, then you need to set this field to

correspond to the CHAP “secret” at the remote end.

In the

Framing type

field, select

SLIP

PPP

In the

IP address

field, type the IP address of the remote user.

Remote IP User: ruby NetBlazer Setup Utility V3.0

Set up user account to allow IP packet mode connection from a

remote node.

DELETE ruby

Password: <<NOT SET>>

Crypto key: <<NOT SET>>

Framing type: PPP

IP address/bits:

Help

Return to Main Menu

Press Enter to return to the previous screen