Technical data

90362-01 Dedicated Connections 8-7

When you press Enter you are asked to enter a number for your

DLCI (Data Link Channel Identifiers). When you type a number and

press Enter, you see the Frame Relay Line screen:

Figure 8-5. The Frame Relay Line Screen

If you want to delete the currently selected interface, move to the

Delete

field and press Enter. You are asked if you really want to

delete the interface. If you type

, the interface is deleted and you

return to the Frame Relay Connection screen, where you can choose

another interface.

The

DLCI

field displays the number you typed for your DLCI. If you

need to change that number, type a number from 16 to 9007. Data

Link Channel Identifiers are provided by your frame relay service

provider.

If you want to have a dial backup for this frame relay connection (to

be used if the frame relay connection goes down), type the name of

a previously configured dial-up connection in the

Dial backup

text

field. If you type a name that doesn’t match the list of dial-up inter-

faces already set for this NetBlazer, you get an error message.

Frame Relay Line: syn11 NetBlazer Setup Utility V3.0

Configure interface jones on syn11. Select Protocol details

to set up routes for the remote LAN. Type a dial-up connection

name at Dial backup.

DELETE jones

DLCI: 16

Protocol details

Dial backup:

Line management: none

Help

Return to Main Menu

Type name of an existing dial-up LAN-to-LAN interface