Technical data

90362-01 Dedicated Connections 8-3

Move to the first line you want to add or change and type an inter-

face name for that line. If you are planning to have a dial backup

with this dedicated interface, you may want to give the dedicated

interface a similar name; for example if

jade

is the name of the

remote NetBlazer, then your dial backup should be named

jade

, so

you might name your dedicated interface

jade-ded

To create a frame relay interface, go to “Setting Frame Relay

Connections” on page 8-5.

When you type a name and press Enter, the Dedicated Interface

screen is displayed.

Figure 8-3. The Dedicated Interface Screen

Note:

This field is case sensitive. You should be very careful with case when enter-

ing an interface name.

Be careful not to type any spaces in the interface name; the NetBlazer may

have problems with interface names that have spaces in them.

Also, to avoid problems with remote password files, your interface name

should not include any of the following characters: “

”,“

”, “

”,

“

{

”, “

}

”,

or any nonprinting characters.

Dedicated Interface: chelmsford NetBlazer Setup Utility V3.0

Configure the dedicated interface chelmsford on line01. Select

Protocol details to set up routes for the remote LAN.

DELETE chelmsford

Framing type: PPP

Enable interface: no

Protocol details

Dial backup:

Help

Return to Main Menu

Press Spacebar to select framing type: SLIP PPP