Technical data

7-12 Dial-up Connections 90362-01
c. If you are reconfiguring a NetBlazer that already has an
AppleTalk routing table and you wish to remove all learned
routes from the routing table, move to
Forget AppleTalk routes
and press Enter. (Once the routes are removed, you can select
Learn AppleTalk routes
to have the NetBlazer learn the new
routes.)
6. When you are done, you can select Previous to move back to the
previous screen,
Help
to access the online Help for this screen, or
Return to Main Menu
to go to Main Menu screen.
IP Routing Choices
1.
To configure your NetBlazer to route IP packets to the remote
NetBlazer, display the IP Routes screen:
Figure 7-6. The IP Routes Screen
2.
Check to see if the remote network has configured a connection for
your NetBlazer. Until the remote network has been set up for your
connection, changes to the IP screens cannot take effect.
IP Routes NetBlazer Setup Utility V3.0
Set up IP routes for ruby. Use the Arrow keys to move to an
existing route and press Enter to change it, or type a new
address/bits at New IP route.
Previous
Help
Return to Main Menu
New IP route: <<ADDRESS/BITS>>
Press Enter to return to the previous screen