Technical data

90362-01 Dial-up Connections 7-7
Setting Balanced Interfaces
When you type the name for a set of balanced interfaces (for example,
chicago.1-3) on the Dial-up LAN-to-LAN screen and press Enter, you see
the Dial-up Connection screen for the primary interface. The primary inter-
face is the first interface of the group you created, so in the case of
chicago.1-3, the primary interface is chicago.1.
Figure 7-4. The Dial-up Connection Screen for a Primary Interface
You can create up to 10 balanced interfaces per line, from name .0 to name .9.
Balanced interfaces can only have a one-digit number following their name.
Dial-Up Connection: chicago.1 NetBlazer Setup Utility V3.0
Add or change information for the current dial-up LAN-to-LAN
interface. You must set either a crypto key or a password on this
screen.
Previous
DELETE chicago.1
Framing type: PPP
Password: <<NOT SET>>
Crypto key: <<NOT SET>>
Dial-In: Yes
Phone number: -
Characteristics: dialout
Protocol details
Help
Return to Main Menu
Press Enter to return to the previous screen
Note:
Any changes or selections made on this screen the first time you see it for a
newly-created primary interface are duplicated on all of the secondary
interfaces as well. For example, if you set a telephone number for the
primary interface, and then view this screen for one of the secondary
interfaces, you see the same phone number. However, any changes made to
the primary interface at any time after leaving this screen are not duplicated
for the secondary interfaces.