Technical data

90362-01 Dial-up Connections 7-3

To set up balanced interfaces type

hostname.

, where

n-n

are two

numbers between 0 and 9 indicating the number of balanced inter-

faces you want to create. For example, if you type

chicago.1-3

the

NetBlazer creates three balanced interfaces: chicago.1, chicago.2,

and chicago.3. If you want to create balanced interfaces, skip the rest

of the steps in this section and go to “Setting Balanced Interfaces”

on page 7-7.

To change the configuration information on an existing connection,

move to the applicable name in the list below the

New connection

field and press Enter.

When you press Enter, the Dial-up Connection screen appears:

Figure 7-3. The Dial-up Connection Screen

Be careful not to type any spaces in the remote hostname; the NetBlazer

does not recognize hostnames when they have spaces in them.

Dial-up Connection: ruby NetBlazer Setup Utility V3.0

Add or change information for the current dial-up LAN-to-LAN

interface. You must set either a crypto key or a password on this

screen. When you are done, select Protocol details.

DELETE ruby

Framing type: PPP

Password: <<NOT SET>>

Crypto key: <<NOT SET>>

Dial-In: Yes

Phone number: -

Characteristics: dialout

Protocol details

Help

Return to Main Menu

Press Enter to return to the previous screen