Technical data

6-2 ISDN Connections 90362-01
Configuring an ISDN Connection
You can use Worksheet 6, the “ISDN” worksheet on page B-9 to collect and
organize the information you need to complete the tasks in this section. (If
you need information on ISDN service providers, see Appendix J, "ISDN
Service Providers and Manufacturers.")
To set up ISDN, follow these steps:
1. Establish a connection to your NetBlazer as described on page 3-3.
2. Select NetBlazer port setup.
3. Move to ISDN setup and press Enter.
The NetBlazer checks to see if your NetBlazer includes ISDN
capabilities. If it does, you see the ISDN Configuration screen;
otherwise, you get an error message.
Figure 6-1. The ISDN Configuration Screen
ISDN Configuration NetBlazer Setup Utility V3.0
Enter the SPID values provided by your ISDN service
provider, then set the ISDN switch type.
Previous
SPID/DN bri011: <<NOT SET>>
SPID/DN bri012: <<NOT SET>>
Switch type: none
Help
Return to Main Menu
Press Enter to return to the previous screen