Technical data

4-12 NetBlazer and LAN Setup 90362-01
5. For New zone , type a new zone name and press Enter. The new zone
appears in the
Zones Defined
list. For
lt
interfaces you can have only
one zone per interface.If you are configuring an
en
interface, you
can have a multiple zones. To add any additional zones, type names
one at a time, pressing Enter after each name. Note that you need to
set at least one zone before you can leave this screen.
To delete a zone, move to the zone name in the
Zones Defined list
and press Delete to delete that zone.
For more information on zones, see Appendix E, “AppleTalk
Routing,” or Apple Computer’s Inside Macintosh .
6.
When you are done, you can configure another interface as a seed
router, configure another protocol, or return to the Main Menu
screen.
Note:
The items on this screen are not set until you exit the screen by moving to
the Previous screen. This means that if you change a field after you have
moved the cursor to a new field, the settings currently in effect for the
NetBlazer do not change. Also, if you return to the Main Menu instead of
selecting Previous, your changes are not set.