Technical data

90362-01 NetBlazer and LAN Setup 4-5

On the NetBlazer Port Setup screen, select

LAN

. The IP LAN

Setup screen appears.

Figure 4-3. The IP LAN Setup Screen

In the

Global address/bits

text field, specify the IP Address for the

NetBlazer; for example,

143.191.11.5/24

. If the NetBlazer has not

previously been configured for IP, this address is temporarily set to

192.0.2.1

, a default IP address suggested by the IANA (Internet

Assigned Number Authority).

For the

/bits

part of the address, for example, you might specify

/24

for a netmask of

255.255.255.0

. See Appendix C, “IP Addressing,”

for more information on IP addresses and subnet bitmasks.

For

Domain name suffix

, type the suffix the domain name server uses

instead of the numeric routing addresses. For example, one of

Telebit’s domain name servers uses the suffix

sunnyvale.telebit.com

for its routing. If you do not have a domain name server on the local

network, leave this field unchanged and skip step 4.

IP LAN Setup NetBlazer Setup Utility V3.0

Use this screen to set up the NetBlazer for a local IP network.

You must assign an IP address/bits to the NetBlazer and each of

its interfaces.

Global address/bits: 192.0.2.1/24

Domain name suffix:

Domain name server:

en0 address/bits: 192.0.2.1/24

Help

Return to Main Menu

Press Enter to return to the previous screen