Technical data

90362-01 Using the Setup Utility 3-9

The system displays a couple of informational messages while the

software is loaded, then you see the Main Menu screen:

Figure 3-4. The Main Menu Screen

Main Menu NetBlazer Setup Utility V3.0

Welcome to the NetBlazer Setup Utility. To learn how to use the

Setup Utility, press Enter on "First-time user help". To get Help

on individual items, Tab to that item and press the "?" key.

First-time user help

NetBlazer setup

NetBlazer port setup

Dial-up LAN-to-LAN

Dedicated LAN-to-LAN

Dial-in users

Dial-out modem pool

Save/Exit

Press Enter to get Help on using the Setup Utility

Note:

If you have any problems displaying the Main Menu screen, press

Ctrl-x Ctrl-x to exit the Setup Utility. Your terminal or terminal emulation

software must be set to ANSI.

Only one session of the Setup Utility should be running at a time. Attempting

to run multiple sessions may result in memory problems in the NetBlazer LS.

If your screens get garbled, you can press Ctrl-l to refresh the current

screen.

If you are reconfiguring an already configured NetBlazer and would like to

return all settings to the factory defaults, turn the NetBlazer off and insert a

paperclip in the small hole to the right of the on/off power rocker. Keep the

paper clip inserted for five or more seconds while you turn on the power.

This will completely delete all saved configuration and password files.